Emissions from a fast-pyrolysis bio-oil fired boiler: Comparison of health-related characteristics of emissions from bio-oil, fossil oil and wood.

There is currently great interest in replacing fossil-oil with renewable fuels in energy production. Fast pyrolysis bio-oil (FPBO) made of lignocellulosic biomass is one such alternative to replace fossil oil, such as heavy fuel oil (HFO), in energy boilers. However, it is not known how this fuel change will alter the quantity and quality of emissions affecting human health. In this work, particulate emissions from a real-scale commercially operated FPBO boiler plant are characterized, including extensive physico-chemical and toxicological analyses. These are then compared to emission characteristics of heavy fuel-oil and wood fired boilers. Finally, the effects of the fuel choice on the emissions, their potential health effects and the requirements for flue gas cleaning in small-to medium-sized boiler units are discussed. The total suspended particulate matter and fine particulate matter (PM1) concentrations in FPBO boiler flue gases before filtration were higher than in HFO boilers and lower or on a level similar to wood-fired grate boilers. FPBO particles consisted mainly of ash species and contained less polycyclic aromatic hydrocarbons (PAH) and heavy metals than had previously been measured from HFO combustion. This feature was clearly reflected in the toxicological properties of FPBO particle emissions, which showed less acute toxicity effects on the cell line than HFO combustion particles. The electrostatic precipitator used in the boiler plant efficiently removed flue gas particles of all sizes. Only minor differences in the toxicological properties of particles upstream and downstream of the electrostatic precipitator were observed, when the same particulate mass from both situations was given to the cells.

Scalable Synthesis of Biodegradable Black Mesoporous Silicon Nanoparticles for Highly Efficient Photothermal Therapy.

Porous silicon (PSi) has attracted wide interest as a potential material for various fields of nanomedicine. However, until now, the application of PSi in photothermal therapy has not been successful due to its low photothermal conversion efficiency. In the present study, biodegradable black PSi (BPSi) nanoparticles were designed and prepared via a high-yield and simple reaction. The PSi nanoparticles possessed a low band gap of 1.34 eV, a high extinction coefficient of 13.2 L/g/cm at 808 nm, a high photothermal conversion efficiency of 33.6%, good photostability, and a large surface area. The nanoparticles had not only excellent photothermal properties surpassing most of the present inorganic photothermal conversion agents (PCAs) but they also displayed good biodegradability, a common problem encountered with the inorganic PCAs. The functionality of the BPSi nanoparticles in photothermal therapy was verified in tumor-bearing mice in vivo. These results showed clearly that the photothermal treatment was highly efficient to inhibit tumor growth. The designed PCA material of BPSi is robust, easy to prepare, biocompatible, and therapeutically extremely efficient and it can be integrated with several other functionalities on the basis of simple silicon chemistry.

Differences between co-cultures and monocultures in testing the toxicity of particulate matter derived from log wood and pellet combustion.

BACKGROUND: In vitro studies with monocultures of human alveolar cells shed deeper knowledge on the cellular mechanisms by which particulate matter (PM) causes toxicity, but cannot account for mitigating or aggravating effects of cell-cell interactions on PM toxicity. METHODS: We assessed inflammation, oxidative stress as well as cytotoxic and genotoxic effects induced by PM from the combustion of different types of wood logs and softwood pellets in three cell culture setups: two monocultures of either human macrophage-like cells or human alveolar epithelial cells, and a co-culture of these two cell lines. The adverse effects of the PM samples were compared between these setups. RESULTS: We detected clear differences in the endpoints between the mono- and co-cultures. Inflammatory responses were more diverse in the macrophage monoculture and the co-culture compared to the epithelial cells where only an increase of IL-8 was detected. The production of reactive oxygen species was the highest in epithelial cells and macrophages seemed to have protective effects against oxidative stress from the PM samples. With no metabolically active cells at the highest doses, the cytotoxic effects of the PM samples from the wood log combustion were far more pronounced in the macrophages and the co-culture than in the epithelial cells. All samples caused DNA damage in macrophages, whereas only beech and spruce log combustion samples caused DNA damage in epithelial cells. The organic content of the samples was mainly associated with cytotoxicity and DNA damage, while the metal content of the samples correlated with the induction of inflammatory responses. CONCLUSIONS: All of the tested PM samples induce adverse effects and the chemical composition of the samples determines which pathway of toxicity is induced. In vitro testing of the toxicity of combustion-derived PM in monocultures of one cell line, however, is inadequate to account for all the possible pathways of toxicity.

Particulate emissions from modern and old technology wood combustion induce distinct time-dependent patterns of toxicological responses in vitro.

Toxicological characterisation of combustion emissions in vitro are often conducted with macrophage cell lines, and the majority of these experiments are based on responses measured at 24h after the exposure. The aim of this study was to investigate how significant role time course plays on toxicological endpoints that are commonly measured in vitro. The RAW264.7 macrophage cell line was exposed to PM1 samples (150µg/ml) from biomass combustion devices representing old and modern combustion technologies for 2, 4, 8, 12, 24 and 32h. After the exposure, cellular metabolic activity, cell membrane integrity, cellular DNA content, DNA damage and production of inflammatory markers were assessed. The present study revealed major differences in the time courses of the responses, statistical differences between the studied samples mostly limiting to differences between modern and old technology samples. Early stage responses consisted of disturbances in metabolic activity and cell membrane integrity. Middle time points revealed increases in chemokine production, whereas late-phase responses exhibited mostly increased DNA-damage, decreased membrane integrity and apoptotic activity. Altogether, these results implicate that the time point of measurement has to be considered carefully, when the toxicity of emission particles is characterised in in vitro study set-ups.

Interaction effects of polyfluoroalkyl substances and sex steroid hormones on asthma among children.

To evaluate the interactions between polyfluoroalkyl substances (PFASs) and reproductive hormones and associated asthma, a total of 231 asthmatic and 225 non-asthmatic adolescents were selected from northern Taiwan in the Genetic and Biomarkers study for Childhood Asthma from 2009-2010. The interaction between PFASs and reproductive hormones on asthma was analyzed with a two-level binary logistic regression model. The results showed that, among asthmatics, PFASs were positively associated with estradiol levels and negatively associated with testosterone levels. However, only significant association was identified for PFNA and estradiol in control group. After controlling for hormone levels, associations between PFAS exposure and asthma were consistently stronger among children with higher than lower estradiol, with odds ratios (OR) for asthma ranging from 1.25 for PFOS (95% Confidence Interval [CI]: 0.90, 1.72) to 4.01 for PFDA (95% CI: 1.46, 11.06) among boys and 1.25 for PFOS (95% CI: 0.84, 1.86) to 4.16 for PFNA (95% CI: 1.36, 12.73) among girls. Notably, the interactions between estradiol and PFASs were significant for PFOS (p = 0.026) and PFNA (p = 0.043) among girls. However, testosterone significantly attenuated the association between PFOS and asthma across sex. In conclusions, our findings suggested that reproductive hormones amplify the association between PFASs and asthma among adolescents.

Toxicity of airborne dust as an indicator of moisture problems in school buildings.

Moisture-damaged indoor environments are thought to increase the toxicity of indoor air particulate matter (PM), indicating that a toxicological assay could be used as a method for recognizing buildings with indoor air problems. We aimed to test if our approach of analyzing the toxicity of actively collected indoor air PM in vitro differentiates moisture-damaged from non-damaged school buildings. We collected active air samples with NIOSH Bioaerosol Cyclone Samplers from moisture-damaged (index) and non-damaged (reference) school buildings (4 + 4). The teachers and pupils of the schools were administered a symptom questionnaire. Five samples of two size fractions [Stage 1 (>1.9 µm) and Stage 2 (1-1.9 µm)] were collected from each school. Mouse RAW264.7 macrophages were exposed to the collected PM for 24 h and subsequently analyzed for changes in cell metabolic activity, production of nitric oxide (NO), tumor necrosis factor (TNF)-α and interleukin (IL)-6. The teachers working in the moisture-damaged schools reported respiratory symptoms such as cough (p = 0.01) and shortness of breath (p = 0.01) more often than teachers from reference schools. Toxicity of the PM sample as such did not differentiate index from reference building,s but the toxicity adjusted for the amount of the particles tended to be higher in moisture-damaged schools. Further development of the method will require identification of other confounding factors in addition to the necessity to adjust for differences in particle counts between samples.

Enhanced T helper 1 and 2 cytokine responses at birth associate with lower risk of middle ear infections in infancy.

BACKGROUND: Respiratory tract infections and their symptoms are frequent during early childhood, but their risk factors, including the effect of early immune regulation, are less known. The aim of the study was to analyze whether stimulated cord blood cytokine production is associated with the frequency of respiratory tract infection symptoms or infections during the first year of life. METHODS: The study population consisted of children of mothers from farm or non-farm rural environment from Austria, Finland, Germany, and Switzerland who participated in a prospective birth cohort study (PASTURE: Protection against Allergy-Study in Rural Environments) (N = 550). Cord blood samples were stimulated with the combination of phorbol ester and ionomycin (P/I) for 24 h, and the production of IL-5, IL-10, TNF-α, and IFN-γ was determined using ELISA. Information about infectious morbidity was collected using weekly diaries. RESULTS: P/I-stimulated production of IL-5 (adjusted risk ratio (aRR) for ≤median production, 0.37; 95% confidence interval (CI), 0.25-0.55, aRR for >median production, 0.41; 95% CI, 0.27-0.61 vs. production median production, 0.39; 95% CI, 0.25-0.62 vs. production

Evaluation of sampling methods for toxicological testing of indoor air particulate matter.

There is a need for toxicity tests capable of recognizing indoor environments with compromised air quality, especially in the context of moisture damage. One of the key issues is sampling, which should both provide meaningful material for analyses and fulfill requirements imposed by practitioners using toxicity tests for health risk assessment. We aimed to evaluate different existing methods of sampling indoor particulate matter (PM) to develop a suitable sampling strategy for a toxicological assay. During three sampling campaigns in moisture-damaged and non-damaged school buildings, we evaluated one passive and three active sampling methods: the Settled Dust Box (SDB), the Button Aerosol Sampler, the Harvard Impactor and the National Institute for Occupational Safety and Health (NIOSH) Bioaerosol Cyclone Sampler. Mouse RAW264.7 macrophages were exposed to particle suspensions and cell metabolic activity (CMA), production of nitric oxide (NO) and tumor necrosis factor (TNFα) were determined after 24 h of exposure. The repeatability of the toxicological analyses was very good for all tested sampler types. Variability within the schools was found to be high especially between different classrooms in the moisture-damaged school. Passively collected settled dust and PM collected actively with the NIOSH Sampler (Stage 1) caused a clear response in exposed cells. The results suggested the higher relative immunotoxicological activity of dust from the moisture-damaged school. The NIOSH Sampler is a promising candidate for the collection of size-fractionated PM to be used in toxicity testing. The applicability of such sampling strategy in grading moisture damage severity in buildings needs to be developed further in a larger cohort of buildings.

Chemical and microbial components of urban air PM cause seasonal variation of toxicological activity.

The chemical and microbial composition of urban air particulate matter (PM) displays seasonal variation that may affect its harmfulness on human health. We studied the in vitro inflammatory and cellular metabolic activity/cytotoxicity of urban air particulate samples collected in four size-ranges (PM10-2.5, PM2.5-1, PM1-0.2, PM0.2) during four seasons in relatively clean urban environment in Helsinki, Finland. The composition of the same samples were analyzed, including ions, elements, PAH compounds and endotoxins. In addition, microbial contribution on the detected responses was studied by inhibiting the endotoxin-induced responses with Polymyxin B both in the PM samples and by two different bacterial strains representing Gram-positive and -negative bacteria. Macrophage cell line (RAW 264.7) was exposed to the size segregated particulate samples as well as to microbe samples for 24h and markers of inflammation and cytotoxicity were analyzed. The toxicological responses were dependent on the dose as well as size range of the particles, PM10-2.5 being the most potent and smaller size ranges having significantly smaller responses. Samples collected during spring and autumn had in most cases the highest inflammatory activity. Soil components and other non-exhaust particulate emissions from road traffic correlated with inflammatory responses in coarse particles. Instead, PAH-compounds and K(+) had negative associations with the particle-induced inflammatory responses in fine particles, suggesting the role of incomplete biomass combustion. Endotoxin content was the highest in PM10-2.5 samples and correspondingly, the largest decrease in the responses by Polymyxin B was seen with the very same samples. We found also that inhibitory effect of Polymyxin B was not completely specific for Gram-negative bacteria. Thus, in addition to endotoxin, also other microbial components may have a significant effect on the toxicological responses by ambient particulate matter.

A Single Aspiration of Rod-like Carbon Nanotubes Induces Asbestos-like Pulmonary Inflammation Mediated in Part by the IL-1 Receptor.

Carbon nanotubes (CNT) have been eagerly studied because of their multiple applications in product development and potential risks on health. We investigated the difference of two different CNT and asbestos in inducing proinflammatory reactions in C57BL/6 mice after single pharyngeal aspiration exposure. We used long tangled and long rod-like CNT, as well as crocidolite asbestos at a dose of 10 or 40 µg/mouse. The mice were sacrificed 4 and 16 h or 7, 14, and 28 days after the exposure. To find out the importance of a major inflammatory marker IL-1ß in CNT-induced pulmonary inflammation, we used etanercept and anakinra as antagonists as well as Interleukin 1 (IL-1) receptor (IL-1R-/-) mice. The results showed that rod-like CNT, and asbestos in lesser extent, induced strong pulmonary neutrophilia accompanied by the proinflammatory cytokines and chemokines 16 h after the exposure. Seven days after the exposure, neutrophilia had essentially disappeared but strong pulmonary eosinophilia peaked in rod-like CNT and asbestos-exposed groups. After 28 days, pulmonary granulomas, goblet cell hyperplasia, and Charcot-Leyden-like crystals containing acidophilic macrophages were observed especially in rod-like CNT-exposed mice. IL-1R-/- mice and antagonists-treated mice exhibited a significant decrease in neutrophilia and messenger ribonucleic acid (mRNA) levels of proinflammatory cytokines at 16 h. However, rod-like CNT-induced Th2-type inflammation evidenced by the expression of IL-13 and mucus production was unaffected in IL-1R-/- mice at 28 days. This study provides knowledge about the pulmonary effects induced by a single exposure to the CNT and contributes to hazard assessment of carbon nanomaterials on airway exposure.

Particulate matter from both heavy fuel oil and diesel fuel shipping emissions show strong biological effects on human lung cells at realistic and comparable in vitro exposure conditions.

BACKGROUND: Ship engine emissions are important with regard to lung and cardiovascular diseases especially in coastal regions worldwide. Known cellular responses to combustion particles include oxidative stress and inflammatory signalling. OBJECTIVES: To provide a molecular link between the chemical and physical characteristics of ship emission particles and the cellular responses they elicit and to identify potentially harmful fractions in shipping emission aerosols. METHODS: Through an air-liquid interface exposure system, we exposed human lung cells under realistic in vitro conditions to exhaust fumes from a ship engine running on either common heavy fuel oil (HFO) or cleaner-burning diesel fuel (DF). Advanced chemical analyses of the exhaust aerosols were combined with transcriptional, proteomic and metabolomic profiling including isotope labelling methods to characterise the lung cell responses. RESULTS: The HFO emissions contained high concentrations of toxic compounds such as metals and polycyclic aromatic hydrocarbon, and were higher in particle mass. These compounds were lower in DF emissions, which in turn had higher concentrations of elemental carbon ("soot"). Common cellular reactions included cellular stress responses and endocytosis. Reactions to HFO emissions were dominated by oxidative stress and inflammatory responses, whereas DF emissions induced generally a broader biological response than HFO emissions and affected essential cellular pathways such as energy metabolism, protein synthesis, and chromatin modification. CONCLUSIONS: Despite a lower content of known toxic compounds, combustion particles from the clean shipping fuel DF influenced several essential pathways of lung cell metabolism more strongly than particles from the unrefined fuel HFO. This might be attributable to a higher soot content in DF. Thus the role of diesel soot, which is a known carcinogen in acute air pollution-induced health effects should be further investigated. For the use of HFO and DF we recommend a reduction of carbonaceous soot in the ship emissions by implementation of filtration devices.

Role of microbial and chemical composition in toxicological properties of indoor and outdoor air particulate matter.

BACKGROUND: Ambient air particulate matter (PM) is increasingly considered to be a causal factor evoking severe adverse health effects. People spend the majority of their time indoors, which should be taken into account especially in future risk assessments, when the role of outdoor air particles transported into indoor air is considered. Therefore, there is an urgent need for characterization of possible sources seasonally for harmful health outcomes both indoors and outdoors. METHODS: In this study, we collected size-segregated (PM(10-2.5), PM(2.5-0.2)) particulate samples with a high volume cascade impactor (HVCI) simultaneously both indoors and outdoors of a new single family detached house at four different seasons. The chemical composition of the samples was analyzed as was the presence of microbes. Mouse macrophages were exposed to PM samples for 24 hours. Thereafter, the levels of the proinflammatory cytokines, NO-production, cytotoxicity and changes in the cell cycle were investigated. The putative sources of the most toxic groups of constituents were resolved by using the principal component analysis (PCA) and pairwise dependencies of the variables were detected with Spearman correlation. RESULTS: Source-related toxicological responses clearly varied according to season. The role of outdoor sources in indoor air quality was significant only in the warm seasons and the significance of outdoor microbes was also larger in the indoor air. During wintertime, the role of indoor sources of the particles was more significant, as was also the case for microbes. With respect to the outdoor sources, soil-derived particles during a road dust episode and local wood combustion in wintertime were the most important factors inducing toxicological responses. CONCLUSIONS: Even though there were clear seasonal differences in the abilities of indoor and outdoor air to induce inflammatory and cytotoxic responses, there were relatively small differences in the chemical composition of the particles responsible of those effects. Outdoor sources have only a limited effect on indoor air quality in a newly built house with a modern ventilation system at least in a low air pollution environment. The most important sources for adverse health related toxicological effects were related to soil-derived constituents, local combustion emissions and microbes.

Reference particles for toxicological studies of wood combustion: formation, characteristics, and toxicity compared to those of real wood combustion particulate mass.

Multiple studies show that particulate mass (PM) generated from incomplete wood combustion may induce adverse health issues in humans. Previous findings have shown that also the PM from efficient wood combustion may induce enhanced production of reactive oxygen species (ROS), inflammation, and cytotoxicity in vitro and in vivo. Underlying factors of these effects may be traced back to volatile inorganic transition metals, especially zinc, which can be enriched in the ultrafine fraction of biomass combustion particulate emission. In this study, nanoparticles composed of potassium, sulfur, and zinc, which are the major components forming inorganic fine PM, were synthesized and tested in vitro. In addition, in vitro toxicity of PM from efficient combustion of wood chips was compared with that of the synthesized particles. Cytotoxicity, cell cycle arrest, ROS generation, and tumor necrosis factor alpha release were related to zinc concentration in PM. Potassium sulfate and potassium carbonate did not induce toxic responses. In light of the provided data, it can be concluded that zinc, enriched in wood combustion emissions, caused the toxicity in all of the measured end points.

The effect of assay type and sample matrix on detected cytokine concentrations in human blood serum and nasal lavage fluid.

Cytokine concentrations in biological fluids are widely used markers for activation of immunological processes. Confirming the reproducibility of measurements is important, especially in longitudinal or multicenter studies where time between analyses or different analyzing laboratories increases the intra-assay variability. In this study, the reproducibility of the cytokine analysis conducted with different assay platforms was studied by comparing the results of two cytokines [interleukin (IL)-6 in serum and nasal lavage fluid (NAL) and IL-8 in NAL] analyzed with Meso Scale Discovery (MSD) ultra-sensitive single and multiplex assay kits (n=76). In addition, the difference in cytokine levels between two biological sample matrices was studied by comparing the results of altogether 9 cytokines [IL-6, IL-2, IL-8, IL12p70, IL-1ß, granulocyte-macrophage colony-stimulating factor (GM-CSF), interferon (IFN)γ, IL-10 and tumor necrosis factor (TNF)α] measured from serum and NAL of the same study subjects (n=460). The results show that the cytokine concentrations analyzed with single and multiplex assays are concordant but not equal. Comparison of the different matrices revealed that cytokine concentrations in serum do not correspond with concentrations detected in nasal lavage fluid. It can be concluded that comparability of the results from single and multiplex analysis of cytokines is high, but the concentrations should not be compared directly with each other. The differences between concentrations analyzed from serum and nasal lavage fluid indicate that the levels are specific for each matrix and represent distinct immunological conditions.

Acute systemic and lung inflammation in C57Bl/6J mice after intratracheal aspiration of particulate matter from small-scale biomass combustion appliances based on old and modern technologies.

Inflammation is regarded as an important mechanism behind mortality and morbidity experienced by cardiorespiratory patients exposed to urban air particulate matter (PM). Small-scale biomass combustion is an important source of particulate air pollution. In this study, we investigated association between inflammatory responses and chemical composition of PM(1) emissions from seven different small-scale wood combustion appliances representing old and modern technologies. Healthy C57Bl/6J mice were exposed by intratracheal aspiration to single dose (10 mg/kg) of particulate samples. At 4 and 18 h after the exposure, bronchoalveolar lavage fluid (BALF) as well as serum was collected for subsequent analyses of inflammatory indicators (interleukin (IL)-6, IL-1ß, IL-12, and IL-10; tumor necrosis factor-α (TNF-α); keratinocyte-derived chemoattractant (KC), and interferon-γ (IFN-γ)) in multiplexing assay. When the responses to the PM(1) samples were compared on an equal mass basis, the PM from modern technology appliances increased IL-6, KC, and IL-1ß levels significantly in BALF at 4 and 18 h after the exposure. In contrast, these responses were seen only at 4 h time point in serum. Increased cytokine concentrations correlated with metal-rich ash related compounds which were more predominant in the modern technology furnaces emissions. These particles induced both local and systemic inflammation. Instead, polycyclic hydrocarbon (PAH) rich PM(1) samples from old technology (OT) evoked only minor inflammatory responses. In conclusion, the combustion technology largely affects the toxicological and chemical characteristics of the emissions. The large mass emissions of old combustion technology should be considered, when evaluating the overall harmfulness between the appliances. However, even the small emissions from modern technologies may pose significant toxic risks.

Toxicological properties of emission particles from heavy duty engines powered by conventional and bio-based diesel fuels and compressed natural gas.

BACKGROUND: One of the major areas for increasing the use of renewable energy is in traffic fuels e.g. bio-based fuels in diesel engines especially in commuter traffic. Exhaust emissions from fossil diesel fuelled engines are known to cause adverse effects on human health, but there is very limited information available on how the new renewable fuels may change the harmfulness of the emissions, especially particles (PM). We evaluated the PM emissions from a heavy-duty EURO IV diesel engine powered by three different fuels; the toxicological properties of the emitted PM were investigated. Conventional diesel fuel (EN590) and two biodiesels were used - rapeseed methyl ester (RME, EN14214) and hydrotreated vegetable oil (HVO) either as such or as 30% blends with EN590. EN590 and 100% HVO were also operated with or without an oxidative catalyst (DOC + POC). A bus powered by compressed natural gas (CNG) was included for comparison with the liquid fuels. However, the results from CNG powered bus cannot be directly compared to the other situations in this study. RESULTS: High volume PM samples were collected on PTFE filters from a constant volume dilution tunnel. The PM mass emission with HVO was smaller and with RME larger than that with EN590, but both biofuels produced lower PAH contents in emission PM. The DOC + POC catalyst greatly reduced the PM emission and PAH content in PM with both HVO and EN590. Dose-dependent TNFα and MIP-2 responses to all PM samples were mostly at the low or moderate level after 24-hour exposure in a mouse macrophage cell line RAW 264.7. Emission PM from situations with the smallest mass emissions (HVO + cat and CNG) displayed the strongest potency in MIP-2 production. The catalyst slightly decreased the PM-induced TNFα responses and somewhat increased the MIP-2 responses with HVO fuel. Emission PM with EN590 and with 30% HVO blended in EN590 induced the strongest genotoxic responses, which were significantly greater than those with EN590 + cat or 100% HVO. The emission PM sample from the CNG bus possessed the weakest genotoxic potency but had the strongest oxidative potency of all the fuel and catalyst combinations. The use of 100% HVO fuel had slightly weaker and 100% RME somewhat stronger emission PM induced ROS production, when compared to EN590. CONCLUSIONS: The harmfulness of the exhaust emissions from vehicle engines cannot be determined merely on basis of the emitted PM mass. The study conditions and the engine type significantly affect the toxicity of the emitted particles. The selected fuels and DOC + POC catalyst affected the PM emission from the heavy EURO IV engine both qualitative and quantitative ways, which influenced their toxicological characteristics. The plain HVO fuel performed very well in emission reduction and in lowering the overall toxicity of emitted PM, but the 30% blend of HVO in EN590 was no better in this respect than the plain EN590. The HVO with a DOC + POC catalyst in the EURO IV engine, performed best with regard to changes in exhaust emissions. However some of the toxicological parameters were significantly increased even with these low emissions.

Efficiency of log wood combustion affects the toxicological and chemical properties of emission particles.

CONTEXT: Particulate matter (PM) has been identified as a major environmental pollutant causing severe health problems. Large amounts of the harmful particulate matter (PM) are emitted from residential wood combustion, but the toxicological properties of wood combustion particles are poorly known. OBJECTIVE: To investigate chemical and consequent toxicological characteristics of PM(1) emitted from different phases of batch combustion in four heating appliances. MATERIALS AND METHODS: Mouse RAW264.7 macrophages and human BEAS-2B bronchial epithelial cells were exposed for 24 h to different doses (15-300 µg/mL) of wood combustion particles. After the exposure, cytotoxicity, genotoxicity, production of the inflammatory mediators (TNF-α and MIP-2) and effects on the cell cycle were assessed. Furthermore, the detected toxicological responses were compared with the chemical composition of PM(1) samples including PAHs, metals and ions. RESULTS: All the wood combustion samples exerted high cytotoxicity, but only moderate inflammatory activity. The particles emitted from the inefficient phase of batch combustion in the sauna stove (SS) induced the most extensive cytotoxic and genotoxic responses in mammalian cells. Polycyclic aromatic hydrocarbons (PAHs) and other organic compounds in PM(1) samples might have contributed to these effects. Instead, water-soluble metals seemed to participate in the cytotoxic responses triggered by the particles from more efficient batch combustion in the masonry heaters. Overall, the toxicological responses were decreased when the combustion phase was more efficient. CONCLUSION: Efficiency of batch combustion plays a significant role in the harmfulness of PM even under incomplete wood combustion processes.

Exhaled nitric oxide and atherosclerosis.

BACKGROUND: Fractional exhaled nitric oxide concentration (FENO) measurement has been proposed to be an important adjunct in the diagnosis and management of asthma, pulmonary hypertension and cystic fibrosis. But do we understand how other diseases influence the FENO values? In particular, atherosclerosis is one of the pathological conditions, in which nitric oxide (NO) production is inhibited and its degradation enhanced. Therefore, hypothesis of the current study was that FENO is inversely associated with risk markers of atherosclerosis and with diseases leading secondarily to the progression of atherosclerosis. MATERIALS AND METHODS: A long-term FENO value (median of biweekly measurements over a 24-week period) of 53 patients with ischaemic heart disease (IHD) was compared with the results of clinical and biochemical analyses. RESULTS: Fractional exhaled NO was inversely associated with the plasma concentration of triglycerides (P = 0·01) and with the blood concentration of glycated haemoglobin A1c (P = 0·03). It also tended to be inversely associated with the plasma glucose concentration (P = 0·10). However, there were no statistically significant associations with inflammatory or other biochemical markers, health status, lifestyle or other personal determinants. CONCLUSIONS: In accordance with the hypothesis, FENO is inversely associated with some of risk markers of atherosclerosis in patients with stable IHD (triglycerides and haemoglobin A1c, a marker of hyperglycaemic metabolism). A potential explanation is that, at hyperglycaemia and with higher triglyceride concentrations, atherosclerosis leads to endothelial dysfunction and, subsequently, to decreased production and increased degradation of NO.

Toxicological effects of emission particles from fossil- and biodiesel-fueled diesel engine with and without DOC/POC catalytic converter.

There is increasing demand for renewable energy and the use of biodiesel in traffic is a major option when implying this increment. We investigated the toxicological activities of particulate emissions from a nonroad diesel engine, operated with conventional diesel fuel (EN590), and two biodiesels: rapeseed methyl ester (RME) and hydrotreated fresh vegetable oil (HVO). The engine was operated with all fuels either with or without catalyst (DOC/POC). The particulate matter (PM(1)) samples were collected from the dilution tunnel with a high-volume cascade impactor (HVCI). These samples were characterized for ions, elements, and polycyclic aromatic hydrocarbon (PAH) compounds. Mouse RAW264.7 macrophages were exposed to the PM samples for 24 h. Inflammatory mediators, (TNF-α and MIP-2), cytotoxicity, genotoxicity, and oxidative stress (reactive oxygen species [ROS]) were measured. All the samples displayed mostly dose-dependent toxicological activity. EN590 and HVO emission particles had larger inflammatory responses than RME-derived particles. The catalyst somewhat increased the responses per the same mass unit. There were no substantial differences in the cytotoxic responses between the fuels or catalyst use. Genotoxic responses by all the particulate samples were at same level, except weaker for the RME sample with catalyst. Unlike other samples, EN590-derived particles did not significantly increase ROS production. Catalyst increased the oxidative potential of the EN590 and HVO-derived particles, but decreased that with RME. Overall, the use of biodiesel fuels and catalyst decreased the particulate mass emissions compared with the EN590 fuel. Similar studies with different types of diesel engines are needed to assess the potential benefits from biofuel use in engines with modern technologies.

Immunotoxicological properties of airborne particles at landfill, urban and rural sites and their relation to microbial concentrations.

We investigated the immunotoxicological activity of airborne particles in three different environments during 11 months. Specifically, we analyzed the relation of the immunotoxicological activity to microbial concentrations. During the study period, samples from a landfill, an urban and a rural site were collected on filters once a month. The immunotoxicological characteristics of collected particle samples were studied by exposing mouse macrophages (RAW264.7), and measuring the viability and production of inflammatory mediators i.e. nitric oxide (NO), tumor necrosis factor (TNF)-alpha and interleukin (IL)-6 after 24 hours. In addition, the results were compared to corresponding microbial concentrations measured with quantitative polymerase chain reaction (qPCR) in the same sites. The particles collected from the landfill caused significantly more toxicity and inflammatory responses than the particles from other sites. The immunotoxicological activity of the samples changed according to the season, being the lowest in all study sites in the winter. In the rural and urban sites the responses peaked during the spring, whereas at the landfill the highest responses were detected towards the fall. All immunotoxic responses correlated strongly with airborne microbial concentrations at the landfill, whereas on the other sites the correlations were weaker. These results indicate that the overall immunotoxicological activity of the particles is increased in waste handling area with a heavy microbial load. The activity of the samples collected from different sites changes according to the season being at their lowest at wintertime. At the waste center, the immunotoxicological responses are related with concentrations of microbes, whereas at rural area and city center other factors seem to govern the toxicity of the sample.